D Deyou Home Decor

Rolls vs Sheets: Which Peel and Stick Format Should Distributors Stock?

Deyou sells the same wall in two formats: rolls and sheets. A roll is a continuous covering, cut to length on site; a sheet is a finished tile unit, repeated across the wall. The format decides measurement, seams, packing, and ordering. This article compares the two on verified product-page facts.

What a roll is

Deyou's rolls are 1.2 × 3 m and 1 mm thick, in two families. The marble-effect wall rolls (models such as DY-GB55 and DY-GB52) are EPE material with an aluminium film on the reverse, with a theoretical area of 3.6 m² per roll before trimming; their specification tables state that actual coverage depends on cuts and joins. The PVC wallpaper rolls (such as DY-R008) are 1 mm PVC with HD digital printing, listed as waterproof, oil-proof, cuttable and removable, for walls, furniture, cabinets and countertops. Rolls cover a wall in long strips, the marble running continuously down each strip.

What a sheet is

Deyou's sheets come in two materials. Gel sheets are 1 mm and flexible: YJC0224 measures 294 × 214 mm and 1.0 ± 0.05 mm — polyurethane (PU) gel, PET, adhesive, release paper. Aluminum-PVC sheets are 3 mm and rigid: YLS002 measures 306 × 298 mm, effective coverage about 306 × 291 mm; other series measure 312 × 305 mm. The two materials are compared in the gel vs aluminum-PVC vs vinyl comparison. Each sheet is one finished tile or mosaic unit, grout lines built in. Sheet sizes vary by design, so check the product page before ordering. Gel sheets pack 10 per OPP bag with a custom header card, 300 per carton; aluminum-PVC sheets pack 10 per color box, 50 per carton.

Coverage math: compare like with like

Do not compare rolls and sheets roll-for-sheet. Compare covered area after cutting, using the effective figure on each side. A roll's 3.6 m² is theoretical and untrimmed; actual coverage depends on cuts and joins. A sheet's figure is its effective coverage: YLS002 covers about 306 × 291 mm, or 0.089 m², per sheet — not the 0.091 m² its sheet size suggests. As arithmetic only, before cutting waste on either side, one roll's nominal 3.6 m² equals about 40 sheets. Waste falls differently: rolls lose offcuts at wall ends, openings and joins; sheets lose cuts around sockets and edges. Measure each wall separately and keep spares: the tile quantity guide explains the method, and the roll coverage and cutting waste article explains strip-counting for rolls. Compare cost per covered square metre after waste — never price per roll against price per sheet.

Seams, pattern and finish

The visible difference is the seam. A roll wall has few: long vertical joins between strips, veins running continuously down each strip. The seam method — and whether the pattern must match across the join — must be confirmed for the exact roll; the roll pages direct buyers to follow the confirmed instructions for trimming, joins and application. A sheet wall has many seams, and that is the design: every sheet edge is a grout line, the grid is regular, and a damaged section can be re-done sheet by sheet from kept spares. Both formats need a smooth, dry, sound surface, dust and grease removed; DY-R008's page excludes powdery, peeling, rough, moldy or uneven walls. Confirm substrate requirements and test a sample first.

Handling, storage and ordering

The marble-effect rolls pack 24 per carton, each in individual blister packaging, in a carton with an outer woven bag: 0.1577 m³, about 25 kg, with the net/gross basis and final weight to be confirmed before shipment. Confirm carton dimensions for warehouse planning, and PVC roll packing separately — no carton data is published for it. Sheets pack compactly: 300 gel sheets per carton for YJC0224, 50 aluminum-PVC sheets per carton. Ordering differs too: sheets have a confirmed minimum of 2,000 per design and at least 5 designs per order, while rolls have no published minimum — the roll pages state that minimum quantity, quantity per design and mixed patterns must be enquired about separately. Confirm the roll minimum before planning an assortment; the distributor bestseller guide logic applies to sheets, and to rolls only once the minimum is known.

Which format for which customer

Large plain walls with few obstacles suit rolls: long strips, few seams, continuous marble. Backsplashes, small areas, columns and niches suit sheets: small units fit around sockets and edges. Starting small or buying for rental touch-ups suits sheets: order by the design, replace one sheet later. Furniture, cabinet and countertop renovation suits the PVC roll family, whose pages list exactly those uses. Heat and cleaning limits must be confirmed per product — see the stove and heat safety article. Neither format is a floor covering — Deyou's floor tiles are a separate 300 × 300 mm, 1.5 mm, five-layer product; see the wall vs floor article.

What to confirm before ordering

Ask for these in writing, for the exact product. For rolls: roll size, effective width, length, seam and join method, material and reverse construction, carton quantity, dimensions, volume and weight, minimum quantity and mixing rules. For sheets: sheet size, effective coverage per sheet, carton quantity. For both: substrate requirements, heat limit and safe distances, allowed and banned cleaners and tools, and which certificates or test documents can be provided. Request samples first: a full-length strip for a roll, a sample sheet for sheets.

How to enquire

Send the format, designs, quantity and destination through the contact form, and request samples of anything you have not handled. Deyou's products have passed independent third-party testing. Browse the sticker tile range (where the rolls are listed), the 3D gel tile range and the aluminum-PVC tile range first, so the enquiry can name the closest products.