Distributors choosing between peel and stick wall tiles face three materials that look similar in a photo and behave differently on a wall: PU gel, aluminum-PVC composite, and vinyl. Deyou sells the first two. Vinyl is sold by other brands and is included here because buyers ask about it — every vinyl figure below is that brand's own published figure, not Deyou's. This article compares what each material is, how thick and rigid it is, where each fits, and what to confirm before ordering.
What each material is
Deyou's gel tiles are 1 mm sheets: a PU or epoxy gel surface on a PET base, with a self-adhesive backing and a release paper. The gel surface gives the tile its depth — the pattern sits under a clear, slightly raised layer, which is why gel tiles read as three-dimensional up close. Deyou's aluminum-PVC tiles are 3 mm composite sheets: an aluminum surface on a PVC core, also with a self-adhesive backing. The aluminum face is what carries the metallic looks — marble with silver or gold metal strips, for example — and the PVC core gives the sheet its body. Vinyl peel and stick tiles from other brands are a single flexible plastic sheet with a printed surface and an adhesive backing; they have no gel layer and no metal face. The three materials are therefore not three versions of the same tile. They are three different constructions, and the construction decides the rest.
Thickness and rigidity: what the hand feels
Thickness is the fastest way to tell them apart. Deyou's gel tiles measure 1.0 ± 0.05 mm — thin and flexible, easy to cut around sockets and to press into a slight curve or an uneven spot. Deyou's aluminum-PVC tiles are 3 mm — rigid sheets that hold their shape, sit flat, and feel solid to the touch. Vinyl sits in between and varies by brand: STICKGOO publishes 1.8 mm for its thin wall tiles and 2.5 mm for its thick ones, while WOTILE publishes about 1.0 mm for its wall tiles. Those are the brands' own figures, observed in November 2026, for their own products. Rigidity matters for installation and for the finish: a flexible sheet forgives a wall that is not perfectly flat; a rigid sheet shows the wall underneath it and needs a flat, clean, sound substrate. Neither is better in general — a rental bathroom with uneven plaster and a new retail display wall are different jobs.
How the three compare
| Gel (Deyou) | Aluminum-PVC (Deyou) | Vinyl (other brands) | |
|---|---|---|---|
| Thickness | 1 mm (1.0 ± 0.05 mm) | 3 mm | About 1.0–2.5 mm, varies by brand |
| Construction | PU or epoxy gel surface, PET base, adhesive backing | Aluminum surface, PVC core, adhesive backing | Printed flexible plastic sheet, adhesive backing |
| Feel | Flexible, slightly raised 3D surface | Rigid, flat, solid | Flexible, flat print |
| Sheet size (Deyou) | Packed 10 pieces per bag; carton quantity varies by size | 306 × 298 mm and 312 × 305 mm; 10 pieces per box, 50 per carton | Not a Deyou product — check the brand's listing |
| Minimum order (Deyou) | 2,000 pieces per design, at least 5 designs | 2,000 pieces per design, at least 5 designs | Not a Deyou product |
Two notes on the table. First, the effective coverage of an aluminum-PVC sheet is slightly less than its sheet size — for example, YLS002 measures 306 × 298 mm with an effective coverage of about 306 × 291 mm — so use the coverage figure in the quotation, not the sheet size, when calculating quantities; the tile quantity guide explains the conversion. Second, carton quantities for gel tiles vary by sheet size, so confirm the carton quantity for the exact design in the quotation rather than assuming one figure fits all designs.
Look: depth, metal, and print
Up close, the three materials photograph differently. Gel tiles have real depth: the clear gel layer catches light, which suits marble, mosaic and subway looks that need to look wet or glossy. Aluminum-PVC tiles have a real metal face where the design calls for it — silver or gold strips are metal, not printed grey or yellow — and the rigid sheet keeps grout lines straight across a whole wall. Vinyl tiles are a flat print: the pattern is only as good as the print resolution, and there is no gel depth or metal to catch the light. For a distributor, this is a display decision as much as a product decision: put a gel sample and an aluminum-PVC sample side by side on the same board, and a retail buyer can feel the difference in ten seconds. A photo alone does not show it.
Where each fits
Both Deyou materials suit kitchens and bathrooms as wall coverings, and both are peel and stick — no grout, no adhesive to mix, no curing time. The choice between them usually comes down to the wall and the customer. Gel tiles, being thin and flexible, are the easier choice for uneven walls, curved details and quick rental renovations. Aluminum-PVC tiles, being rigid, are the easier choice where the customer wants a flat, solid, premium-feeling wall — a retail display, a reception wall, or a kitchen backsplash that will be looked at closely. Vinyl from other brands is the comparison buyers bring to the table; if a customer asks why Deyou's tiles cost what they do, the answer is the construction above, not a claim about the other brand. Two limits apply to all three and must be confirmed per product before specifying: heat — the temperature limit and the safe distance from stoves, fireplaces and ovens — and cleaning — which cleaners and tools are allowed and which are banned. Deyou's heat guidance is covered in the stove and heat safety article, and the exact figures for each product must be confirmed before ordering. Neither material is a floor tile: Deyou's floor tiles are a separate product, 300 × 300 mm and 1.5 mm thick with five layers including a wear layer, as explained in the wall vs floor article.
Ordering: same minimums, different mix
For Deyou, the ordering rules are the same for both materials: 2,000 pieces per design, with at least 5 designs per order. The decision is therefore not which material is cheaper to start — it is which mix earns its place in the five. The assortment logic from the distributor bestseller guide still applies: a proven core of white subway and white marble, one or two metallic accents, and one test design. Either material can carry the core looks, so choose the material per design — gel where flexibility and depth sell the design, aluminum-PVC where a flat metal-strip look sells it — rather than committing the whole order to one material. Samples first: handle both materials, install a sheet of each on the same wall, and let the customer who will sell them decide which one they can describe with confidence.
What to confirm before ordering
Ask for these in writing, for the exact design and the exact material: the sheet size and the effective coverage per sheet; the carton quantity and carton weight; the heat limit and the safe distance from each type of stove; the allowed cleaners and the banned cleaners and tools; the expected service life and the removal method — whether it leaves adhesive and whether it damages the wall; and which certificates or test documents can be provided, and whether they cover the product or only its materials. The heat, cleaning, lifespan and certificate answers must be confirmed with the factory for the exact product; until those answers arrive, treat any figure from another brand's page as background only. A supplier who cannot answer these questions for the exact product is not a supplier to build an assortment on.
How to enquire
Send the designs, the material for each design, the quantity per design and the destination through the contact form, and request samples of any design or material you have not handled before. Deyou's products have passed independent third-party testing. Browse the 3D gel tile range and the aluminum-PVC tile range first, so the enquiry can name the closest existing products.