A self-adhesive waterproofing membrane looks like a simple purchase: one roll size, one product code, four colors. But the buying decision depends on details no product photo shows: thickness, material structure, substrate requirements, overlap width, suitable locations and warranty. This article sets out what is confirmed about Deyou's DY-WP-001 membrane, and what to confirm with the supplier before ordering.
What DY-WP-001 is
DY-WP-001 is a self-adhesive waterproofing membrane in 1×5 m rolls, in four colors — silver, blue, red and gray — each with its own item code: DY-WP-001-S, DY-WP-001-B, DY-WP-001-R and DY-WP-001-G. The manufacturer describes the series as a nano thermal-insulation self-adhesive waterproofing membrane. That is the manufacturer's description, not a verified performance statement — request the technical data behind it before relying on it for any project requirement. The product page itself instructs buyers to confirm thickness, material structure, technical performance, installation requirements and lead time before ordering.
Roll size, coverage and the overlap question
Each roll measures 1×5 m, covering a nominal 5 m² before overlaps and cutting. Nominal is the important word. Usable coverage depends on overlaps and cutting, and the overlap width has not been confirmed — so usable coverage per roll cannot yet be calculated exactly. Do not order on the nominal figure alone. Once the overlap width is confirmed, usable coverage follows from a simple calculation: effective strip width (roll width minus overlap) multiplied by laid length, minus cutting waste. Ask for the confirmed overlap width and a recommended cutting allowance for your layout, then calculate the roll quantity from usable coverage and round up.
Four colors, and why color needs a physical sample
The four colors — silver, blue, red and gray — are the visible difference between the four item codes, and the choice usually depends on whether the membrane will stay visible and whether it must match adjacent materials. Product images are prepared from actual photographs, but the product page states that buyers should refer to the physical product for color. Screens shift color, and a membrane that looks right in a photograph can read differently on site. Confirm the color with a physical sample before committing to a full order, and use the full item code — including the color suffix — in every enquiry and order so there is no ambiguity about which color is being supplied.
Packing, volume and freight planning
Rolls are supplied without a cardboard core, packed 4 rolls per bundle, with a reference packing volume of 0.033 m³ per bundle. Four rolls give a nominal 20 m² per bundle before overlaps and cutting. To estimate freight space, multiply the number of bundles by 0.033 m³. Gross weight per bundle and any outer packing are not published on the product page, so confirm them in the quotation before arranging freight. Confirm handling and storage requirements with the supplier if the rolls will be stored before installation.
Thickness, structure and performance: what to confirm
Thickness, base material and material structure have not been confirmed for DY-WP-001, and no technical performance data is published. Put these questions to the supplier, in writing: the thickness of the membrane; the base material and the layer structure; the technical data behind the manufacturer's description, including any thermal-insulation claim; and which certificates or test documents can be provided, and whether they cover the product itself or only its materials. A marketing description is not evidence of performance. State any project performance requirement in the enquiry and request the supporting document by name; if no document exists for it, establish that before ordering, not afterwards. No warranty statement is published for this product either: ask explicitly whether a warranty applies and what it covers, and get the answer in writing.
Installation and suitable locations: what to confirm
Installation requirements and suitable locations have not been confirmed either. Before specifying DY-WP-001 for any location, confirm: which substrates it can be applied to; any substrate moisture requirement; the installation temperature range; the overlap width at seams; and how internal and external corners and other details are treated. Each affects whether the membrane performs as intended: the wrong substrate, a damp surface or an unconfirmed overlap can undermine an installation that looks correct on the day. Also confirm which locations the membrane is suitable for before specifying it, rather than assuming from the word "waterproofing" that every wet location is suitable. State the intended application in the enquiry — the location, the substrate and the exposure to water — and ask the supplier to confirm suitability for that exact combination.
How to enquire
Send the item code including the color suffix, the color, the required quantity, the destination and the intended application through the contact form, and ask for the confirmed thickness, material structure, installation requirements, suitable locations and warranty terms for that exact application, together with availability, packing details, lead time and the technical data sheet. Browse the waterproofing membrane range and the DY-WP-001 product page.