For importers and building-material wholesalers, a raised glossy finish does not identify a tile's resin. Check the written material specification before choosing 3D peel and stick wall tiles for your range.
What is in this PU gel tile series?
The supplied specification states 60% polyurethane (PU), 20% PET, 10% adhesive and 10% release backing paper. This describes the overall supplied composition, including the removable liner. The document does not state whether the percentages are measured by weight. The raised surface is PU gel; it should not be described as epoxy resin.
What the composition does not tell you
Material percentages alone do not establish fire rating, heat resistance, service life, emissions, adhesion strength or suitability for direct shower exposure. Ask for relevant test documentation and confirm the installation conditions for the exact item. A decorative wall tile is not a substitute for a waterproofing system.
Five checks for a wholesale sample
- Match the item: record the design code and compare the sample with the approved product photo.
- Measure usable coverage: distinguish full sheet size from the area covered after interlocking or overlap. Use usable coverage when estimating an order.
- Review the finish: inspect the raised surface, printing, edges and consistency between sheets under similar lighting.
- Trial the adhesive: test on the intended clean, smooth, dry wall and follow the item's installation instructions. Do not promise residue-free removal on every wall.
- Confirm packing: obtain pieces per pack and carton, carton dimensions and gross weight for the actual order before estimating freight.
Choose a design before requesting a quote
Compare the arch strip design DY0165, white-grey marble herringbone DY0393 and hexagon design DY0224. Confirm dimensions and packing on the selected item rather than applying one design's figures to the entire series.
Send a complete enquiry
Tell Deyou Home Decor your business type, destination country or port, selected design codes, estimated quantity and sample requirements. MOQ, lead time, packaging and freight are subject to the confirmed quotation.
Request a wholesale quote on WhatsApp
FAQ
Are PU gel and epoxy the same material?
No. For this series, use the confirmed polyurethane (PU) specification when preparing purchasing documents and product listings.
Can I use the composition as a performance certificate?
No. Composition identifies materials; performance claims require appropriate evidence for the specific product and application.