D Deyou Home Decor

Mixed Container Ordering: Combining UV Marble Sheets, Fluted Panels and Waterproof Rolls in One 40HQ

A distributor outside São Paulo sells our UV marble sheets steadily — a few hundred sheets a month to contractors redoing kitchens and shopfronts. After his second order he asked the question we hear most often at this stage: can I add fluted panels and waterproof rolls to the same container, instead of paying for three separate shipments?

Yes — and that question is where a lot of first-time importers quietly lose money, because they answer it by volume. They picture the container as empty space to fill. We load containers every week, and the honest rule is different.

A mixed container only pays when every line inside it can sell at its own pace. What you save is one customs clearance and one inland haul from the port — not extra product squeezed into gaps. Load by weight and fragility, never by empty space. And never mix in a line you can't move at its minimum order, because a slow line sitting in your warehouse eats the freight you just saved. If one line alone already fills the container by weight, adding a second line means cutting the first — only do it if the second line earns its kilos.

What mixing actually saves

A 40HQ from Yiwu to Santos carries one bill of lading, one customs entry and one truck to your warehouse whether it holds one product or three. Split the same goods across three shipments and you pay those fixed costs three times — plus three rounds of port waiting. That is the whole saving. It is real money on a Brazil route, where the inland leg from Santos to the interior can cost as much attention as the ocean leg. What mixing does not do is make freight cheaper per kilo: the ocean freight is charged on the container, and the container's limit is weight long before it is space. Our 40HQ math from an earlier article still applies: a 40HQ holds about 1,400 sheets of 3.0 mm UV marble sheet, about 1,650 of 2.5 mm, about 2,000 of 2.0 mm — because the container hits its weight ceiling first. Those are estimates, confirmed against actual loadings.

Load by weight and fragility, not by empty space

In our warehouse a mixed load goes in like this. Heavy pallets go on the floor first: UV marble sheets are 12 kg a sheet at 2.0 mm, 15 kg at 2.5 mm and 18 kg at 3.0 mm, palletised 200, 150 or 100 sheets to a pallet, each pallet wrapped in stretch film over cardboard protection on a wooden pallet. Fluted panels come next: boxes of 10 pieces, 23.5 kg a box, each piece 160 × 20 × 2,900 mm and about 2.26 kg. Tile cartons and waterproof rolls go on top and into the gaps — they are the lightest items in the load and the most easily crushed, so they never go underneath a pallet of stone-effect sheet. Nothing loose, nothing leaning: a roll that shifts in transit becomes a dent in the sheet next to it.

A worked load, Brazil

Say you want one 40HQ to Santos with three lines. A standard 40HQ is typically rated for about 26 tonnes of cargo — confirm the exact limit with your forwarder, since lines differ. Start from the heavy line:

  • 1,000 sheets of 3.0 mm UV marble sheet (DY-UV-001 to DY-UV-006, your pick of patterns) — 1,000 × 18 kg = 18,000 kg. Minimum order is 100 sheets, at least 50 sheets per pattern.
  • 300 boxes of fluted panels — 300 × 23.5 kg = 7,050 kg. That is 3,000 pieces, well above the 400-piece minimum.
  • Together: 25,050 kg of product. Pallets add roughly another 300 kg (ten UV pallets at about 30 kg each) plus dunnage — call it about 25,500 kg all in, essentially at the ceiling.

There is no room left to be clever. If you want waterproof rolls (DY-WP-001) or peel-and-stick tiles in the same box, something has to come out: cut the UV sheets to 800 and the freed 3,600 kg buys real room. Waterproof rolls run at 100 bundles minimum — one bundle is 4 rolls, so 400 rolls, each 1 × 5 m — and peel-and-stick tiles run at 2,000 pieces per pattern with at least five patterns. Ask us to confirm the packed weight of rolls and tiles before you lock the mix; we quote it from the actual packing, not from a catalogue guess. And confirm the rolls' lead time before ordering: UV sheets and fluted panels both ship 20 days after deposit; the rolls' lead time is confirmed per order.

Three ways a mixed order goes wrong

First, mixing below minimums. Every line keeps its own minimum order — 100 UV sheets, 400 fluted pieces, 100 bundles of rolls, 2,000 tiles per pattern. A "small trial" of 30 rolls in a mixed container is not a trial, it is a no: it cannot be produced at that quantity, and asking for it delays the whole container.

Second, mismatched lead times. If one line needs longer than the others, the container waits for the slowest line. Confirm every line's ship date in writing before you pay the deposit, and if a line is not ready, ship without it rather than holding a full container hostage to one item.

Third, mixing in a line you have never sold. A new pattern or a new product in your market is a sample question first, not a container question. Our A4 samples are free in existing patterns — you pay only the international shipping — so there is no reason to discover in a warehouse in Campinas that a pattern your customers do not want is now 400 pieces of your stock.

How to ask for a mixed-container quote

Send us the three things that decide the load: the product models and patterns you want, your destination country and port, and your estimated quantity per line. We will come back with the packed weights, the loading plan and one ship date — or tell you the mix does not work and why. That is the whole point of ordering this way: one container, one clearance, and stock that all moves.

WhatsApp +86 18058983135 · deyouhome101@outlook.com